Digital conductometer MW064 is designed to monitor specific electrical conductivity of the product water of reverse osmotic systems.
The displayed value corresponds to conductivity referenced to 25 °C (77F). Within 5 to 35 °C range, the conductivity/temperature characteristic is automatically compensated for using a precise temperature sensor integrated within the sensing cell.
As a power supply, 9V alkaline battery is used that ensures absolute safety of risk of electrical shock of the operating personell even in very hazardous areas. To achieve maximum batterry life, the device is equipped with automatic power off feature. The end of life of the baterry is indicated on the diplay. The minimum life time of the battery is more than 4 years at common usage (daily).
The device is embedded in quality plastic enclosure sealed to IP65. The sensing cell is connected to the monitor via a four line shielded cable. The cell is a two electrode flow through tube type sensing system of 8mm inner diameter, terminated with G1/4” inner threads.
|Conductivity range||0,0 - 19,99 µS/cm|
|Accuracy||2 % ± 1 digit|
|Reference temperature||25 °C|
|Automatic temperature compensation range||5 - 35 °C|
|Power saving off time||1 min.|
|Maximum media pressure||4 bary (0,4 MPa)|
|Device dimensions (w×h×d)||98×69×38 mm|
|Sensing cell dimensions (l×h×w)||52×25×22 mm|
|Cable length||30 cm standard, max. 2 m|
|Weight (complete incl. battery)||240 g|
production cost per one litre
cost effective production of high quality purified water without high demand of electrical energy
high quality of the purified water
the purified water complies to all required norms